Universal Rubber Paint Farbex

Universal Rubber Paint Farbex

Farbex Rubber Paint is a modern elastic coating based on acrylic, designed for reliable protection and decoration of various surfaces. Its special formula combines high elasticity, resistance to weather conditions, UV radiation, temperature fluctuations, and mechanical stress. It’s a universal solution for both outdoor and indoor applications, effectively replacing conventional alkyd enamels, latex paints, and facade coatings.

Key Advantages of Farbex Universal Rubber Paint

• Matte finish with an attractive decorative effect
• Wash-resistant (Class 1 per DSTU EN 13300)
• Highly elastic—does not crack when the substrate deforms
• Excellent adhesion to wood, concrete, metal, galvanized surfaces, slate, brick
• High vapor permeability and low water absorption
• Quick-drying (approx. 2 hours per coat)
• Eco-friendly—VOC content less than 30 g/L

How Farbex Rubber Paint Differs from Other Paints

• Much more elastic than traditional coatings
• Withstands temperatures from –20 °C to +50 °C
• Does not crack on facades or roofs
• Adheres well to old painted surfaces, including oil-based and alkyd paints
• Can substitute enamel or waterproofing on vertical areas
• Note: not designed for heavily trafficked floors

Applications by Surface Type

Concrete

Ideal for concrete, aerated concrete, and foam concrete. High adhesion and vapor permeability prevent delamination.

Wood

Perfect for wooden facades, fences, and furniture. Protects wood from moisture, UV exposure, and mold, preserving its integrity.

Roofing

Great for roofs—on slate, tiles, onduline, and corrugated sheet metal. Resists rain, snow, and sun without fading for at least 7 years. Often used for galvanized surfaces and gutters.

Floors

Though abrasion-resistant, not recommended for floors with heavy mechanical wear. Suitable only for light-duty situations.

Coverage & Number of Coats

• Coverage: 100–200 g/m² per coat, variable depending on substrate and applicator
• Recommended: 2–3 coats
• First coat should be checked and corrected before applying the next
• Porous or rough substrates will require more paint

Tinting Options

• Base A: White, usable alone or tinted to pastel/light/medium shades
• Base C: For deep, saturated tones; not to be used unpigmented

Tinting methods: manual with Farbex Color pigment or automatic via color systems (e.g., NCS). Substrate should be uniform or pastel for even results.

Tips for Vivid Colors:

• Use neutral/base coat with Base A, then finish with tinted paint to save on usage
• Always use products from the same batch to avoid color discrepancies
• Conduct a test patch first
• Avoid diluting tinted paint in the final coat—may slightly alter performance
• Saturated colors may have minor performance changes after tinting

Surface Preparation Table

Application Guidelines

Preparation:

• Ensure substrate is fully dry
• Mix paint well; strain if needed
• Dilute up to 5% for brushes/rollers, up to 10% for spray. Excess dilution will reduce coating quality.

Coats:

• Apply 2–3 coats
• Inspect the first coat for uniformity before applying the next
• Wait at least 4 hours after the previous coat has dried before re-coating
• Porous or rough surfaces require more paint

Technique & Conditions:

• Apply evenly and continuously, edge to edge
• Avoid spraying under direct sun, in winds, at humidity over 80%, or temperatures below +10 °C

• Substrate temperature must be at least 3 °C above dew point

Application Methods:

Tip: Use a short-nap roller for a smooth finish; airless spray helps prevent runs.

Drying & Service Conditions:

• Drying time: 24 h under frost-free, rain-free weather
• Full cure in 28 days

Additional Recommendations

• For intense colors (yellow, red, green), undercoat with a pastel base
• Use paint from the same production batch for uniform results
• Not suitable for floors or areas with heavy mechanical loads
• Prolonged water exposure may cause temporary whitening—color restores after drying
• Compatible with prior acrylic or alkyd coatings
• Subsequent coats must be water-based acrylic
• Always test compatibility first

Tool Cleanup

Wash tools with water immediately after use to preserve their condition.

Where to Buy

Purchase Universal Rubber Paint Farbex from Farba4You’s online store. Official certified product, attractive pricing with 10% cashback, fast nationwide delivery across Ukraine, expert consultations, and real customer reviews.